automatischer Trockenpulverfeuerlöscher / manuelle Pulverfüllmaschine / abc Pulverfüllmaschine für Feuerlöscher
Produktbeschreibung
\ n Anwendung Beim GFM-Pulverfüller wird der Motor der Y-Serie mit 0,55 kW als Antriebsleistung für die 2X-Vakuumpumpe verwendet, die sowohl die Pulverfüllanforderungen verschiedener Feuerlöscher als auch das Pulver aus dem Zylinder des verwendeten Feuerlöschers erfüllen kann (vgl zu Abbildung 2). Der Füller verwendet die Füllmethode, die Geschwindigkeit und Genauigkeit integriert. Es stehen zwei Füllmodi zur Verfügung, nämlich kontinuierlich und in Betrieb, die für Hersteller geeignet sind. Automatischer Trockenpulver-Feuerlöscher / Manuelle Pulver-Füllmaschine / Abc-Pulver-Füllmaschine für Feuerlöscher \ n Mögliche Fehler und deren Entfernung \ n Symptoms |
Troubles |
Corrections |
Motor doesn’t run after energization |
Leakage protector is off |
Check if leakage occurs and energized after removal |
Fuse is open or loose |
Replace and tighten |
|
Heat relay is open |
Check if damage occurs and reset by pressing the reset button |
|
Contactor is broken |
Repair or replace |
|
Control circuit is cut off |
Properly connected |
|
Leakage protector breaks after energization |
Power line connected improperly |
Have the filler and power source of three-phase four-wire system connected properly
|
Mains output of three-phase four-wire system is through one leakage protector |
Mains output of three phase four-wire system must be through one leakage protector |
|
Suction pipe doesn’t s work after operation |
Pipe and joint leak |
Repair |
End cap for filling not in place |
Be in place |
|
Suction solenoid valve is not opened |
Have it opened |
|
Manual valve not opened |
Open it |
|
Powder suction is suspended after operation |
Suction pipe is blocked |
Remove the pipe to see if it is reduced and joint blocked |
Pipe leaks |
Repair |
|
Obvious dust exists in the air main |
Filter is damaged with leakage |
Replace |
Check the filter for a second time | ||
After the motor is started, the automatic part doesn’t work |
Contactor is damaged |
Replace or repair |
Time relay is damaged |
Replace or repair |
|
The display flashes or figure is abnormal |
|
|
Sensor of the scale bench fails or the plug is loose |
Check if the welding in the plug of sensor is loose or have it tightened |
|
|
Seatic electricity in the Static electricity in the end cap for filling |
Ground wire for the Ground wire for the scale bench is not connected firmly or metal conductor is not properly fixed |
Automatic stoppage fails when the weight requirement is met |
H value is smaller than L value |
Enter H value the same way as L value and the former must be greater than the latter |
\ n 
\ n automatische Trockenpulver Feuerlöscher / manuelle Pulver Füllmaschine / abc Pulver Füllmaschine für Feuerlöscher \ n 
\ n \ n 
\ n \ n 
\ n 
\ n Packliste Serial No. |
Name |
Size |
Quantity |
Unit |
1 |
Powder filler |
GFM |
1 |
Unit |
2 |
Electronic scale bench |
T3806 |
1 |
Unit |
3 |
End cap for filling |
120mm |
1 |
Piece |
4 |
Suction pipe |
15mm |
4 |
Meter |
5 |
Valve |
65mm |
1 |
Piece |
6 |
Discharge outlet |
|
1 |
Piece |
7 |
Rubber gasket |
65mm |
2 |
Piece |
8 |
Plain rubber gasket |
25mm |
5 |
Piece |
9 |
Certificate of conformity |
GFM |
1 |
Copy |
10 |
Directions for use |
GFM |
1 |
Copy |
Produktgruppe : Feuerlöscher-Maschine
Premium Related Products
